How To – Double Wrap Static Locker 0 What you will need Webbing 1 rated ring 1 rated connector (Carabiner or Shackle) 1 Take a bite of webbing Fold the webbing with the tension side on top, and make a LARGE bite. 2 Pass the bite through the ring 3 Pass the bite through the rings a second time Pass the bite back through the ring(s) below the tail end of the webbing. 3 Pass the bite through the rings a thrist time For the Double Wrap, pass the webbing through the ring(s) a third time. 4 Open the bite and attach the connector 5 Tighten the lock off – YOU ARE DONE! Checkout These Static Lockers! CM 4 1/2 T Line Locker USD $ 45.54 USD $ 43.03 Bolt-Pin (safety) Line Lockers USD $ 38.71 USD $ 37.23 Screw-Pin Shackle Line Locker USD $ 22.01 USD $ 20.87 Black CARB-STEEL Static Locker USD $ 33.39 Sale! Build A Line Locker USD $ 6.45 – USD $ 19.35 Purelock USD $ 120.68 Basic Line Locker USD $ 25.05 2019-02-19T04:55:03+00:00By SlacklifeBC|Gear Talk, How To, Slack University| Leave A Comment Cancel replyYou must be logged in to post a comment.