How To – Basic Static Line Locker 0What you will need Webbing 1 rated ring 1 rated connector (Carabiner or Shackle) 1Take a bite of webbing Fold the webbing with the tension side on top, and make a bite. 2Pass the bite through the ring 3Pass the bite through the ring a second time Pass the bite back through the ring below the non-load end end of the webbing. 4Open the bite and attach the connector 5Tighten the lock off – YOU ARE DONE! Check out these line lockers! 2021-04-01T15:55:13+00:00By SlacklifeBC|How To, Line Lockers, Slack University| Share This Story, Choose Your Platform! FacebookTwitterRedditLinkedInTumblrVkEmail Leave A Comment Cancel replyYou must be logged in to post a comment.